






![]() |
|
Kremenit is a skin friendly ceramic powder which hardens into an extremely hard, porcelain like material after you add water. It is made in white and red-brown terracotta colours. Its toughness can be improved by adding the polymer FORTE. By using this polymer, the curing time is prolonged which enables the manufacture of larger dimension laminates. Burlap, glass fibers, glass mat, etc. can be used for laminating.
Kremenit is a non toxic moulding and laminating system based on aqueous polymer resins and natural mineral crystals.
Advantages
* Non toxic
* Very low odour
* Easy to work
* Solvent free
* Good quality of work
* Tools can be cleaned with water
* Low exotherm
* Possibility to add mineral or metallic powder
* Homogenous coloration
* Dimensional stability
* Moisture resistance
* Durability
* Mechanical resistance
* Fire resistance
* Less working time by employing the product
* Significant increase of the lifetime of silicone moulds
* Excellent quality / price ratio
* No solvent for cleaning
* Easiliy coloration with powder pigments or water based colorants
APPLICATIONS
KREMENIT FORTE can often efficiently replace polyester, polyurethane and epoxy resins in as different applications as :
- architecture
- sets
- art
- movies
- moulds & models
Mixing ratio
1 kg of powder : 250 ml water = 0,6 l of material
4 kg of powder : 1000 ml water = 2,4 l of material
5 kg of powder: 1250 ml water = 3 l of material
Open time: approx. 6 minutes
Hardening time: approx. 10 minutes
Hardness: over 300 N/mm²
PROPERTIES:
Standard colour |
white, terracotta,other colours on demand |
Fresh wet density (unfilled) |
1850 kg / m3 |
Air dry density (unfilled) |
1730 kg / m3 |
Pot life |
10 min – 2 hours (depending on mixing ratio-see table) |
Final set (demould) |
20 – 120 min |
Compressive strength |
25 – 30 MPa after 1 week |
Fire rating |
- |
Maximal bending strength |
18 MPa |
POT LIFE / SETTING TIME can be adjusted by mixing of polymer FORTE with water:
KREMENIT FORTE 100% |
KREMENIT FORTE / Water 1:1 |
KREMENIT FORTE / Water 1:2 |
KREMENIT FORTE / Water 1:3 |
2 hours |
1 hour |
20-30 minutes |
15 minutes |
AREAS OF USE for combination KREMENIT / POLYMER FORTE
- Stucco and mouldings
- Imitation of porcelain and ceramic
- Manufacture of lightweight glass-fiber laminates
- Reinforcement surface coatings for polystyrene
- Manufacture of large hollow figures
- Merging or pasting items from KREMENIT or stone
- Restoration of indoor stone surfaces
LINKS TO THIS PRODUCT IN OUR E-SHOPS:
samsonkamnik.si - high-tech materials
revivo.si - restoration materials