|
|
||||||
Stonit - mineral stone-like casting material
STONIT casting
It is a high-quality inorganic modelling mass, suitable for the production of weather-resistant products similar tonatural stone. It can be pigmented with inorganic alkali resistant pigments.The dosage of the pigments is usually from 1-5 % to the weight of the binder.
We recommend the use of 1-2% of AR glassfibres (12 mm length) for reinforcement of thin-walled products.
ADVANTAGES
- High density
- Low sensitivity to dirt
- Fast curing
- High resistance at low temperatures
- High resistance to wear
CHARACTERISTICS
|
Colour |
flexural strength |
compressive strength |
|
white |
28 days: approx. 15 N/mm² |
1 day: 55 N/mm² 28 days: above 100 N/mm² |
MIXING RATIO
|
Material |
Parts by weight |
|
|
|
|
Component A (powder) |
100 |
|
Component B (liquid) |
18 |
Mix Components A and B for 3-5 minutes by hand or mixer and apply to the surface or in the mould. Demould after 24 hours.
Kovinarska c.28, 1240 Kamnik, Slovenija |
tel.: +386 1 83 17 255, +386 1 83 19 260 fax: +386 1 83 17 179, email: samson@samson-kamnik.si |
 Izberi jezik
|
