VIVAFORM - skin friendly casting material

is perfect material for making single-use molds of the face, hands and other body parts. It captures detail better than other alginates, giving you a more accurate reproduction of your original.
VIVAFORM is easy to use and cures quickly. It reproduces fine detail and makes an excellent temporary mold – good for one or two reproductions of any body part. You can then cast plaster, KREMENIT  or  MODELIT - fast urethane resin into the mold to make a reproduction. 
For making re-usable molds of any body part, use “SKIN” silicone rubber. 


Mixing ratio: 

powder:water 20 g : 40 ml
 
Mixing time, manually 
with spatula:
approx. 1 min 
 
Working time: approx. 4-5 min



Application: 

Before use, loosen contents of bag or can by turning over several times. 
Add VIVAFORM powder to the prepared water and mix vigorously with a spatula for about 1 min. 
Moulding can then take place immediately. 
 The setting time depends on the temperature of the water used. The setting time is longer if cold water is used while warm water requires a shorter setting time.


  
                           

Important: 

The moulding is subject to a certain degree 
of shrinkage when stored for prolonged 
periods. In such cases, the moulding should 
be stored in a sealed plastic bag. Do not 
keep reproductions in water.











Packaging

150 gr, 300 g, 500 g, 15 kg

Storage: 
In well closed, vapour-proof packages at least 12 months. 


 LINKS TO THIS PRODUCT IN OUR E-SHOPS:
  samsonkamnik.si -   high-tech materials              

revivo.si -   restoration materials                          



Follow us on:

Facebook
Twitter
Google Plus
Name:
Email:
Message:

Enter the correct result.

4 plus 2 is equal to:
Vse pravice pridržane © 2013 Samson Kamnik d.o.o. | Izdelava spletnih strani in programiranje: Ms3 d.o.o.